5 Easy Steps to Install a Neon-Sign

5 Easy Steps to Install a Neon-Sign

How to Install a Neon Sign  

So, if you have already placed an order for a neon sign or Neon Led sign or thinking about ordering the same, you may be wondering how to install a neon sign and what are the top ways to mount your neon led sign. Don’t worry about learning the process of installation because we have sorted it all. We will share below a step-by-step easy process to install a neon sign and mount your neon LED sign. 

But, wait! Before thinking to install a neon sign, you must make sure to:

  1. CONSIDER THESE TIPS 

  • Take the help of a friend during the installation process. 
  • Make sure that the neon sign is unplugged before you install it. 
  • Ensure that the neon sign is mounted very securely before plugging in so that it doesn’t fall. 
  • Whether you would be installing your neon LED light indoors or outdoors, take utmost care that the place is free from bugs. 

 For more info Read this blog - Advantages of Neon Lights 

2- GET A LIST OF SUPPLIES READY 

 Before you get ready to install a neon led sign, grab the following supplies from this list to get the action of installation begins: 

  • Neon Lights (An obvious must) 
  • Power Drill 
  • Mounting Screws 
  • Tape measure 
  • Pencil or a marker 
  • Screwdriver 
  • Wire strippers 

Step- 1: Choose a location and determine its dimensions 

The initial and important step for neon light installation is to choose a smooth and plain surface. You must avoid any wall surface that has bumps on it since it will be difficult for your neon lights to stick to that surface. 

Once you’ve chosen the perfect spot for your neon led light, take a tape measure to find out the dimensions of that area. 

Step- 2: Mount the neon led sign with hooks and clips 

After you’ve found the perfect location for your neon led sign, you will need to mark the area where you’ll be mounting the sign using a pencil or a marker. Most neon light kits come with clips or hooks which can be used to attach the neon lights on the wall. Mount the neon led lights based on the instructions that come with the neon light kit. You must be sure to use a level when marking the area so that your sign is mounted evenly. 

Step- 3: Trace the Outline, Dig the holes & Screw  

After you mark the specified area, trace the outline using a pencil and figure out to mark the screw hole locations for the mounts. Now grab your power drill and dig the holes in the marked locations. 

Now it’s time for you to carefully screw the mounting screws into each hole and ensure to tighten them. 

install neon lights

install a neon sign

Step- 4: Attach your neon lights 

Finally, it’s time to attach your neon led lights. For that, firstly thread the wire through each light screwing it in the place that you’ve marked. After the neon lights are attached, use wire strippers to remove the excess wire. 

                               

Step 5: Time to hang the neon led lights! 

After you have attached your neon led lights, it’s time to hang them up for giving a new look to your room! Start with the first neon light, screw it, to finally attach the wire. Repeat this process for each light until the entire design is hung on the wall. 

CONCLUSION 

To catch the eyes of your guests or to add a lively, energetic vibe to your home, a Neon led light is our best pick to decorate your room in a much easy, affordable and trendy manner. But when you install those pretty neon lights on your wall, make sure to consider electrical wiring.  

The placement of wires during the installation of the neon light must be supported and well-placed between the wall studs. You should also use a wire stripper to remove the insulation from the end of each wire before you attach them to the light fixture. 

However, if you’re still unsure of installing the neon light perfectly and still are confused about the same, take no risks. We believe it’s best to consult a professional electrician who’d help you with the right way to install your neon light without any damage caused to it. So, follow our easy method to install neon lights on the wall and get the room glowing some fun! 

 

Back to blog

Leave a comment